Technical details:
Data update: 12.2024 - 2.63.2
Size: 1 Gb
Region: All regions
Type: Diagnostic Tool
Language: English, Dutch, Spanish, Italian, German, French, Persian, Finnish, Russian, Thai, Turkish, Zwedish, Chinese, Czech, Japanese, Korean, Polish, Portuguese
OS: Vista, Win 7, Win 8, Win 10
Instructions: Present
Installation: 1 PC
Version: 12.2024 - 2.63.2
High speed download link
Program description:
Scania Diagnos & Programmer 3 SDP3 communicates with Scania vehicles and Scania industrial and marine engines.
Scania SDP3 diagnostic software is designed to enable the electrical system to function on the CAN network.
Scania SDP3 diagnostic software is used for troubleshooting, adjusting customer preferred parameters, performing calibrations, performing upgrades affecting the electrical system and updating control unit software.
To work with Scania SDP3 diagnostic software VCI2 or VCI3 adapter required
Scania SDP3 software contains tons of irreplaceable information that you need
during the operation and repair of Scania vehicles.
Scania SDP3 diagnostic program carries out diagnostics and troubleshooting, setting of various parameters, calibration, software updates of control units.
Scania SDP3 program is suitable for trucks and buses as well as for Scania industrial and marine engines.
Scania SDP3 software is used for troubleshooting, setting customer preferred parameters, performing calibrations, performing upgrades affecting the electrical system and updating engine control units software.
Supported systems for VCI2 adapter:
APS - air handling
ATA, WTA, CTS and AUS - additional heating, timer, radio
BCS - bus chassis
BWS - bodies
EBS - brake adjustments
EEC - Reducing Emissions
EMS engine management
COO - coordinator
LAS and BBS - closures and alarms
ICL - instrument panel
TCO - tachograph
OPC and RET - gearbox regulation
RTI - traffic information
SMS - suspension control
TPM - Systematic Tire Pressure Monitoring
LDW - Lane Change Alert.
Supported Systems for VCI3 Adapter:
The device is designed to work with vehicles with a production date after 2004.
Heating and air conditioning system in the car;
Compressed air preparation system;
Automatic transmission
Fuel;
Running trucks and buses;
Brakes;
Air suspension;
Engine;
Coordinator;
Dashboard;
Tachograph;
Security alarm;
Alert system;
Lane departure warning system;
A system that monitors tire pressure.
Scania SDP3 software is an excellent tool with powerful functionality (VCI 3).
With such a diagnostic complex, you can carry out dealer-level diagnostic procedures:
work with errors, calibrate and change the parameters of electronic systems, test mechanisms, poll blocks, update software, and also reset service intervals
XCOM 2.54
Scania XCOM is a software diagnostic tool designed for diagnosis and maintenance of trucks, other heavy vehicles or heavy-duty engines made by Scania. Scania XCOM allows you to read, save and modify data (DTC trouble codes, parameters, statistics and other types of data) from various supported ECU on Scania trucks. Scania XCOM is designed to be compatible with both Scania VCI2 and with latest Scania VCI3 diagnostic devices (CAN protocol supported, so there will be no any compatibility issues at all). Despite most common functions of Scania XCOM diagnostic software, there are some exciting features available for XCOM user. First of all, you have the option to turn off SCR catalytic system. You can turn this off so Selective Catalytic System will stop consuming DEF – Diesel Exhaust Liquid). Also, you can turn off or disable EGR (Exhaust Gas Recirculation), immobilizer system, etc. For more advanced users there are options for ECU recovery, reset or unlocking without a PIN code. XCOM Access Level utility allows you to switch between XCOM levels (XCOM High, XCOM Industry & Marine and XCOM Internal). The software shipped with USB HASP license key. Also, you’ll need PC (with Windows XP/Vista/7 32bit version) and VCI diagnostic interface (Scania VCI2 or Scania VCI3) to use this software.
Scania XCOM supported ECU
- Engine management system (EMS)
- Gearbox management system (GMS)
- Retarder system (RET)
- All wheel drive system (AWD)
- Clutch Control (CLS)
- Exhaust Emission Control (EEC)
- Coordinator (COO – COO7)
- Bodywork system (BWS – BCI1)
Scania XCOM supported DTC
- EMS (S6, S7, S8)
- GMS (OPC4, OPC5)
- RET (RET1, RET2)
- AWD (AWD1)
- EEC (SCR1, EEC3)
- COO (COO6, COO7)
- HMS (HMS1)
Other Scania XCOM functions
- SCR turning ON/OFF
- EGR turning ON/OFF
- Immobilizer Enable/Disable
- Truck power increase
- ECU recovery
- ECU reset
- ECU unlock without PIN
User GUIDE
1)When using a VCI3 remote connection (i.e. not with the cable), see
chapter “VCI3 remote connection” that describes how to setup the
VCI3, and how to connect to it through the Scania network or
AdHoc
2) Start XCOM application
3) Connect to CAN by either
a. Select the menu choice File -> Connect to CAN
b. Press the ”F4” key
c. Press the keys ”shift” and ”F4”
4) If the user has the option setting ”display the select ECUs” is
enabled the ”Select ECUs” dialog will be displayed. If the shift + F4
were pressed the dialog will always be displayed.
5) In the ”Select ECUs” dialog the user can either…
a. Scan for all ECUs available on CAN (a functional SetSession
KWP command will be transmitted on CAN) by selecting the
radio button choice ”Connect to all ECUs on CAN” and
pressing the OK-button
b. Scan for those ECUs that has the check mark set in the list
(a physical SetSession KWP command will be transmitted to
the marked ECU’s CAN addresses) by selecting the ”I select
myself” radio button choice and press the OK-key.
If there are more than one VCI connected to the computer the user
can select which VCI to use when connecting to ECUs. The VCI ID
can be found on the back of the VCI.
6) The application now connects to CAN via KWP.
7) If the application detects ECUs with invalid configuration, a
message box will be displayed to query the user whether to allow
the application to correct the ECU or not. Pressing ”yes” will do the
modification (recommended) and ”no” will proceed the connect
sequence without any action.
8) The sequence is now complete and the connected ECUs are
shown in the ECUs menu and in the ECU explorer tree.